Manual Installation - Konica Minolta DiMAGE A200 Instruction Manual

Manual installation

To install the Windows 98 driver manually, follow the instructions in the connecting-the-
camera-to-a-computer section on page 143.
When the camera is plugged into the computer,
the operating system will detect the new device
and the add-new-hardware-wizard window will
open. Place the DiMAGE Viewer CD-ROM in the
CD-ROM drive. Click "Next."
Choose to specify the location of the driver.
The browse window can be used to indicate
the driver location. The driver should be
located in the
:\Win98\USB. When the location is shown in
the window, click "Next."
CD-ROM drive
Choose the recommended search for a
suitable driver. Click "Next."
at
(Continued on the next page.)
145