Lcd Brightness; Shortcut Help - Konica Minolta DiMAGE A2 Instruction Manual

LCD BRIGHTNESS

The brightness of the EVF and LCD monitor is set
independently of each other. Select the display to adjust
using section 1 of the setup menu; the corresponding
monitor activates automatically and the brightness screen
is displayed.
Brightness is controlled in eleven levels. Use the
left/right controller keys to adjust the brightness,
the monitor will adjust accordingly. Press the
central button of the controller to set the level and
complete the operation. Press the menu button
to close the screen without applying any
changes.

SHORTCUT HELP

The shortcut help shows button commands to open the
LCD brightness screen, change the focusing screens,
switch between the digital zoom and Flex Digital Magnifier,
open the setup menu, or reset the camera. To close the
help screen, press the menu button.
The following shortcuts can be used:
Press and hold the display
information button to open the
LCD brightness screen.
132
S
ETUP MENU
LCDbrightness Monitor
Shortcut help EVF
Transfer mode
EVF auto swtch
Video output
Language
Set LCD brightness
Low
:select :enter
Shortcut help
i button LCDbrightness
Func+i button Focus screens
Func+ button Digi.zoom<>
Func+Menu butt Setup menu
Func+QV button Reset camera
Func+ button EVF mode
Set LCD brightness
Low
:select :enter
High
High