Flash Modes - Minolta DiMAGE 7i Instruction Manual

RECORDING MODE

FLASH MODES

Data EVF &
panel LCD monitor
–
–
The flash mode can be changed in the basic section of the recording-mode menu (p. 80). For the
flash to fire, the unit must be manually lifted. The flash will fire in the selected mode regardless of the
amount of ambient light. When the flash is used, the camera sensitivity is automatically set between
ISO 100 and 200. This setting can be changed using the function dial (p. 44). The auto-white-balance
setting will give priority to the flash's color temperature. If preset or custom white-balance settings are
used, priority is given to the active setting's color temperature (p. 62).
FILL FLASH
Fill-flash can be used as the main or sup-
plementary light. In low-light conditions, the
flash will act as the main source of illumina-
tion and overpower the ambient light. Under
strong sunlight or in backlit situations, the
fill-flash can reduce harsh shadows.
86
Used in low-light conditions and to reduce shadows
Fill-flash
under direct sunlight.
Red-eye To reduce the red-eye effect with flash photographs
reduction of people and animals
Rear flash
Flash fires at the end of long exposures.
sync