Table of Contents
Advertisement
•
After entering the data for the first function, do not press the START / QUICK
START (4k) key, but immediately enter the second and, if desired, the third
function. Only then press the START / QUICK START (4k) key.
Example:
As a first step, you want to defrost a frozen gratin, cook it in the microwave as the
second step, and gratinate it in the third step.
•
Select microwave function P-20 by pressing the MICRO (4b) key 9 times.
•
Set the desired defrosting time by turning the TIME / MENU (4f) dial.
•
Then repeatedly press the MICRO (4b) key again, until the desired power setting
for heating the gratin has been reached. The screen (4a) displays "MEM".
•
Enter the cooking time by turning the TIME / MENU (4f) dial.
•
Now press the GRILL (4h) key.
•
Enter the cooking time for gratinating with the grill function by turning the TIME /
MENU (4f) dial.
•
Then press the START / QUICK START (4k) key. The program sequence starts.
SPEEDCOOKING FUNCTION
With this function the power level of the microwave is always 100%. In
speedcooking mode, the times are preset and are selected and displayed by rapidly
pressing the START / QUICK START (4k) key.
The selected setting starts automatically after the last rapid pressing of the START /
QUICK START (4k) key.
The preset times are: 30 seconds, 1 minute, 2 minutes, 3 minutes etc. up to 10
minutes.
Example:
You want to cook for 2 minutes at 100% microwave power level.
•
Rapidly press the START / QUICK START (4k) key 3 times.
•
The cooking process begins.
CHILD SAFETY LOCK
To activate the child safety lock, press and hold the STOP / DELETE (4j) key for
•
about 3 seconds.
•
A signal tone will sound and the screen (4a) displays LOCK.
•
The operating keys are now blocked, only the door (1) can be opened.
To deactivate the child safety lock again, press the STOP / DELETE (4j) key again
•
for about 3 seconds.
•
A signal sounds, the LOCK display goes out, and the operating keys can be used
again.
CLEANING AND CARE
ATTENTION! Before beginning cleaning, switch the device off and pull the power
plug from the wall socket.
•
Keep the device clean. If sprinkles from food or shaken liquids stick to the walls
of the device, wipe them with a damp cloth. If the device is very dirty, a mild
detergent can be used. Avoid the use of spray or other harsh detergents which
could corrode, scratch or dull the surface of the door (1) .
002125_D80D20ESLRIII-TL6_IM_V02a_A120626_10-12-2012_GB.indd 20
20
10/12/2012 4:06 P
Advertisement
Table of Contents
