CONNECTING TO WINDOWS 98 / 98 SECOND EDITION
The driver needs only to be installed once. If the driver cannot be installed automatically,
it can be installed manually with the operating system's add-new-hardware wizard; see
the instructions on the following page. During installation, if the operating system
requests the Windows 98 CD-ROM, inset it into the CD-ROM drive and follow the
accompanying instructions on the screen. No special driver software is required for other
Windows operating systems.
AUTOMATIC INSTALLATION
116
D
-
ATA
TRANSFER MODE
Before connecting the camera to the
computer, place the Digital Camera
Software CD-ROM in the CD-ROM
drive. The Digital Camera Software
installer
launcher
automatically install the Windows 98
USB driver, click on the "Install the
Windows 98 USB mass-storage
driver" button. A window appears to
confirm that the driver should be
installed; click "Yes" to continue.
When
the
driver
successfully installed, a window
appears. Click "OK." Restart the
computer before connecting the
camera (p. 115).
opens.
To
has
been