Wi-Fi Protected Setup - Cisco Linksys WET610N Quick Installation Manual

Wi-Fi Protected Setup

Wi-Fi Protected Setup

Before you begin, make sure the Router's Wi-Fi Protected Setup feature is
enabled . For more information, refer to the documentation for your router .
A.
Select Start . Then select
Continue .
B.
On your router, press the button
that looks like one of the icons
in the picture .
C.
The Bridge is connecting to the
wireless network . Please wait;
this may take a few minutes .
4
Wi-Fi Protected Setup Button on the Router
Wireless-N Ethernet Bridge with Dual-Band
WET610N