Konica Minolta Magicolor 2450 User Manual page 56

USB
PARALLEL
ACTIVE I/F
All factory default values are shown in bold.
ETHER-
NET
42
TCPIP ENABLE
DHCP/
BOOTP
IP
ADDRESS
DEFAULT
ROUTER
ENABLE
JOB TIMEOUT
JOB TIMEOUT
Settings
YES/NO
If is selected, TCP/IP is enabled.
YES
If is selected, TCP/IP is disabled.
NO
Settings
YES/NO
Select whether or not the IP address is
automatically acquired.
If is selected, the IP address is auto-
YES
matically acquired.
If is selected, the IP address is not
NO
automatically acquired.
Setting
192.168.1.2
Set the IP address for this printer on the
network.
Use the Up, Down, Left, and Right keys
to specify the value.
If the IP address is manually specified,
DHCP/BOOTP
Setting
192.168.1.2
Specify the IP address of the router if one
is on the network. Use the Up, Down,
Left, and Right keys to specify the value.
Configuration Menu Overview
is automatically set to .
NO