Marantz NR1403 Owner's Manual page 69

Info.Display
Displays status of operation temporarily when the sound mode is changed or input source is switched. You
can set whether or not to show each of these status displays.
Setting items
On-Screen Info On : Turn display on.
Off : Turn display off.
Audio Display
Sets how long each menu is displayed when the input source is "TUNER".
Setting items
Audio Always : Show display continuously.
30s : Show display for 30 seconds after operation.
10s : Show display for 10 seconds after operation.
Off : Turn display off.
DVD
Default settings are underlined.
Setting details
Default settings are underlined.
Setting details
TV Format
Set the video signal format to be output for the TV you are using.
Setting items
NTSC : Select NTSC output.
Format
PAL : Select PAL output.
"Format" can also be set by the following procedure. However, the menu
screen is not displayed.
1. Press and hold the main unit's
seconds.
"V.Format : <NTSC>" appears on the display.
2. Use the main unit's
signal format.
3. Press the main unit's
NOTE
When a format other than the video format of the connected TV is set, the
picture will not be displayed properly.
66
Video
Default settings are underlined.
Setting details
PRESET CH – STATUS
and for at least 3
PRESET CH + PRESET CH –
or and set the video
STATUS
to complete the setting.