Jeep Compass 2013 Owner's Manual page 98

96 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Installing Child Restraints Using The Top Tether
Anchorage
1. Look behind the seating position where you plan to
install the child restraint to find the tether anchorage.
You may need to move the seat forward to provide
better access to the tether anchorage. If there is no top
tether anchorage for that seating position (see the
charts above), move the child restraint to another
position in the vehicle if one is available.
2. Route the tether strap to provide the most direct path
for the strap between the anchor and the child seat,
routing it over the center of the head restraint.
3. Attach the tether strap hook of the child restraint to
the top tether anchorage as shown in the diagram.
Tether Anchorage Locations
4. Remove slack in the tether strap according to the child
restraint manufacturer's instructions.