Samsung la37b530p7f User Manual page 6

4 PC / DVI AUDIO IN
– DVI audio outputs for external devices.
5 AUDIO OUT [R-AUDIO-L]
– Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends to corresponding
audio in connectors on the Amplifier or DVD Home Theatre.
6 KENSINGTON LOCK (depending on the model)
– The Kensington Lock (optional) is a device used to physically fix the system when used in a public place.
– If you want to use a locking device, contact the dealer where you purchased the TV.
– The location of the Kensington Lock may be different depending on its model.
7 HDMI IN (DVI), HDMI IN , HDMI IN 
– Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)
– No additional Audio connection is needed for an HDMI to HDMI connection.
– When using an HDMI / DVI cable connection, you must use the HDMI IN (DVI) jack.
What is HDMI?
N
'High Definition Multimedia interface' allows the transmission of high definition digital video data and multiple channels of
digital audio.
The HDMI / DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied).
The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital
Copy Protection) coding feature installed, and supports multi - channel digital audio.
The TV may not output sound and pictures may be displayed with abnormal colour when DVD / Blu-ray player / Cable
N
Boxes / Satellite receivers supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI
cable and there is no sound, connect the HDMI cable to the HDMI IN (DVI) jack and the audio cables to the DVI AUDIO
IN jacks on the back of the TV. If this happens, contact the company that provided the DVD / Blu-ray player / Cable Box /
Satellite receiver to confirm the HDMI version, then request a firmware update. HDMI cables that are not 1.3 may cause
annoying flicker or no screen display.
Supported modes for HDMI / DVI and Component.
N
HDMI / DVI 50Hz
HDMI / DVI 60Hz
Component
8 COMPONENT IN , 
– Connect component video cables (optional) to component connector (P
to corresponding component video out connectors on the DVD.
– If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the DVD and connect the
DVD to component connector (P
– The P , P and Y connectors on your component devices DVD are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.
R B
– Connect RCA audio cables (optional) to [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio
out connectors on the DVD.
9 SERVICE
– Connector for service only.
0 AV IN [VIDEO] / [R-AUDIO-L]
– Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
– Connect RCA audio cables to [R-AUDIO-L] on your set and the other ends to corresponding audio out connectors on the
A/V device.
480i 480p 576i
X X X
X O O
O O O
, P , Y) on your set.
R B
English - 
576p 720p 1080i
O O O
X O O
O O O
, P , Y) on the rear of your set and the other ends
R B
1080p
O
O
O