Utility Job Area - Yamaha CP4 Stage Reference Manual

Utility Job Area

Utility Job functions
Two functions can be executed from the Utility Job area — Factory Set and Version.
01: Factory Set
The Factory Set function can be used to restore the stage piano's User Memory to its default
condition.
Procedure 1. Press the [UTILITY] button.
2. On the Utility menu, use the [ ] button to select 07: Job, and then press the [ENTER] button.
3. Use the [ ] button to select 01: FactorySet, and then press the [ENTER] button.
4. Use the [-1/NO] and [+1/YES] buttons or the Data Dial to set PowerOn Auto to "off" , and then
press the [ENTER] button.
5. When the Confirmation popup is displayed, press the [+1/YES] button to execute the Factory
Set function.
NOTE
The Utility menu is the first screen displayed when the [UTILITY] button is pressed.
NOTE
Before executing this function, the instrument will display the Confirmation popup to confirm that you
wish to proceed ("Are you sure?"). You can press the [+1/YES] button to execute the function or the [-1/
NO] button to return to the previous screen without doing so.
NOTICE
Whenever the Factory Set function is used to restore default settings, all Performance data and Utility
settings stored in the stage piano's User Memory will be overwritten. Be sure, therefore, to save all
important data and settings on a USB flash-memory device in advance.
07: Job selected in Step 2:
01: FactorySet selected in Step 3:
PowerOn Auto set to "off" in Step 4:
Confirmation popup from Step 5:
Job FactorySet
This shows that you are on the Utility area's Factory Set screen.
PowerOn Auto
This parameter is used to enable ("on") or disable ("off") automatic restoration of User Memory to its
default condition whenever the stage piano is turned on. Use the [-1/NO] and [+1/YES] buttons or
the Data Dial to select "on" or "off" as required. Normally, PowerOn Auto should be set to "off". In
addition, this parameter's setting is automatically stored when the Factory Set function is executed.
48 CP4 STAGE/CP40 STAGE Reference Manual
Press the [ENTER] button.
Press the [ENTER] button.
Press the [ENTER] button.
Design of the CP4 STAGE & CP40 STAGE
Reference
Performances
Editing Performances
Common Edit Area
01: Chorus Effect
02: Reverb Effect
03: General
04: Name
Part Edit Area
01: Play Mode
02: Filter/EG
03: Effect-A
04: Effect-B
05: Controller
06: Receive Switch
Master Keyboard Area
Job Area
01: Recall
02: Copy
03: Bulk
Store Performance Function
Compare Performance Function
File Area
01: Save
02: Load
03: Rename
04: Delete
05: Format
06: Memory Info
Utility Area
01: General
02: MIDI
03: Controller
04: MasterComp
05: Master EQ
06: Panel Lock
Utility Job Area
01: Factory Set
02: Version
Appendix