Audio Setup Page - Silvercrest KH 6504 Operating Instructions Manual

8.2 AUDIO SETUP PAGE

DIGITAL AUDIO
* * DIGITAL AUDIO SETUP PAGE * * * * DIGITAL AUDIO SETUP PAGE * * * * DIGITAL AUDIO SETUP PAGE * *
DIGITAL OUTPUT DIGITAL OUTPUT DIGITAL OUTPUT RAW RAW RAW OFF OFF OFF
LPCM OUTPUT LPCM OUTPUT LPCM OUTPUT 48 K 48 K 48 K RAW RAW RAW
PCM PCM PCM
SETUP SPDIF SETUP SPDIF SETUP SPDIF
Select the input DIGITAL AUDIO to set the SPDIF
audio output signal. The input changes to DIGITAL
OUTPUT.
OFF: Select OFF when there is to be no
digital signal output.
RAW: The DVD player outputs the raw
data of the Dolby Digital sound
(default setting).
PCM: Select PCM (Pulse Code Modu-
lation) when a connection to a
digital amplifier/receiver exists.
Your DVD player transmits,
through the PCM signal, the
same audio formats that are
rendered on the disc. In addition
there will be an audio signal out-
put via the left/right connection.
* * DIGITAL AUDIO SETUP PAGE * * * * DIGITAL AUDIO SETUP PAGE DIGITAL AUDIO SETUP PAGE * *
DIGITAL OUTPUT DIGITAL OUTPUT DIGITAL OUTPUT PCM PCM PCM
LPCM OUTPUT LPCM OUTPUT LPCM OUTPUT 48 K 48 K 48 K 48 K 48 K 48 K
96 K 96 K 96 K
SETUP LPCM SETUP LPCM SETUP LPCM
Select the input LPCM-OUTPUT to set the sampling
frequency for the processing of raw data.
48 K: Default setting.
96 K: Only for DVDs with the corres-
ponding sampling frequency.
* * * *
Note:
The LPCM OUTPUT function is only available
if you have set the SPDIF audio output signal
to PCM.
DOLBY DIGITAL
* * DOLBY DIGITAL SETUP * * * * DOLBY DIGITAL SETUP * * * * DOLBY DIGITAL SETUP * *
DUAL MONO DUAL MONO DUAL MONO STR STR STR
DYNAMIC DYNAMIC DYNAMIC
DUAL MONO (1 + 1) SETUP DUAL MONO (1 + 1) SETUP DUAL MONO (1 + 1) SETUP
• Select the input DUAL MONO to set the Dolby
Digital output to either STEREO, L-MONO,
R-MONO or MIX-MONO.
* * DOLBY DIGITAL SETUP * * * * DOLBY DIGITAL SETUP * * * * DOLBY DIGITAL SETUP * *
DUAL MONO DUAL MONO DUAL MONO STR STR STR
DYNAMIC DYNAMIC DYNAMIC
DYN. COMPR. OFF DYN. COMPR. OFF DYN. COMPR. OFF
• Select the input DYNAMIC to enable an
optimal sound replay with reduced volume.
• In the setting FULL the louder passages will
be surpressed and the softer passages will be
played back louder.
Note:
This function is only possible when using a
digital audio component.
- 16 -
STEREO STEREO STEREO
L-MONO L-MONO L-MONO
R-MONO R-MONO R-MONO
MIX - MONO MIX - MONO MIX - MONO
FULL
3/4
1/2
1/4
OFF