Saving the data
The data you made in the MPC1000 will be deleted when you turn off the unit. If you wish to keep the data, proceed
as described in the "Save / Load" section( page 75) or the "Connecting the MPC1000 to your computer" (page 85) of
the operator's manual.
Turning off the Autoload function
The MPC1000 is designed like the other MPC series samplers. However, the MPC1000 is set to automatically load
the preset file when you switch on the unit, so that you can start playing the sound by hitting pads immediately.
If you wish to create a program in the MPC1000, instead of using the preset sounds, you can turn off the Autoload
function. Then the MPC1000 will not load the file automatically when turned on.
01. Press the [MODE] key and then the [PAD 3] (LOAD).
When you press the [MODE] key, its LED will be lit, which allows you to select a mode. If you press the [PAD
3] (LOAD) when the LED is lit, LOAD page will be displayed.
02. In the LOAD from field, press the [WINDOW] key.
This brings up the Load Setup window, where you can set the Autoload function.
03. Select OFF in the Autoload field, and press the [F4] (CLOSE).
04. Turn off the MPC1000 and then turn it on again.
This manual only describes the basic operation of the MPC1000.The MPC1000 has a lot more features for your
music creation. Please read the operator's manual to learn the operation and functions of the MPC1000.
Have fun with the MPC10000!
MPC1000 Quick manual
-9-