Safety Information; Product Information; Items Supplied; Technical Data - Kompernass KH 4102 Operating Instructions Manual

Solar lamp
Hide thumbs Also See for KH 4102:
Table of Contents

Advertisement

Available languages

Available languages

SOLAR LAMP
KH 4102
Intended use
The Solar Lamp is intended for installation in the
open (gardens etc.). It is intended exclusively for
private, non-commercial, applications.

Technical Data

Battery:
1,2V / 900 mAh Ni-MH-
Battery Type AAA
Lighting Duration: Up to 8 hours
(when properly charged)
• Energy saving LED (LED Class1)
• 6 x 6 cm Collector panel
• water spray protected (IP 44)

Safety information

Risk of personal injury!
• Never leave children unsupervised with the
Solar Lamp.
• The earth spike has a sharp pointed end.
This could lead to injuries.
• This appliance is not intended for use by
individuals (including children) with restricted
physical, physiological or intellectual abilities
or deficiences in experience and/or know-
ledge unless they are supervised by a person
responsible for their safety or receive from
this person instruction in how the appliance
is to be used.
• Children should be supervised to ensure that
they do not play with the appliance.
Warning!
• Never use the Solar Lamp for puposes
other than those described here.
Otherwise it could cause irreparable
damage to the appliance.

Items supplied

• Solar Lamp (with collector-panel)
• Earth spike
• Operating Instructions
Description of the appliance
1 Function switch (OFF / ON)
2 Collector panel
3 LED
4 Casing
5 Earth spike

Product Information

• During the day, the solar cells convert sun-
light into electricity and charge the battery.
At night / twilight, the Solar Lamp auto-
matically switches itself on and provides
light by means of the stored electical power.
• The number of operating hours is dependant
on how long and how intensively the sun
has shone upon the collector panel 2.
Placement
For best results, place your Solar lamp in a
location where sunlight shines directly onto the
collector panel 2. The location must be free
from shadow and shade. Make sure that the
collector panel 2 is not subjected to light
sources other than sunlight. Otherwise, the
lamp will not be switched on at twilight.
- 8 -

Advertisement

Table of Contents
loading

Table of Contents