Storage Features - Kenmore 970-7030 Series Use & Care Manual

Storage Features

CAUTION
To avoid injury from breakage, handle
tempered glass shelves carefully.
NOTE
Features may vary according to model.
Your refrigerator includes Spill-Proof
glass shelves that are designed to catch
and hold accidental spills.
You can easily adjust shelf positions
in the fresh food compartments to suit
your needs. The shelves have mounting
brackets that attach to slotted supports at
the rear of each compartment.
To Change the Position of a Shelf:
1. Remove all food from shelf.
2. Lift the front edge up and pull the
shelf out.
3. Replace by inserting the mounting
bracket hooks into the desired
support slots.
4. Lower the shelf and lock into position.
Shelf features
Full Spill-Proof
Half Spill-Proof
TM
Shelf
TM
Shelf
TM
20
Drawers
Your refrigerator includes a variety of
storage drawers. These drawers are
located in fixed positions at the bottom of
the fresh food compartment.
Crispers
Crisper drawers are designed for storing
fruits, vegetables, and other fresh produce.
Opening Crisper Drawer
Crisper Humidity Control
Crisper drawers include a sliding control
for adjusting the humidity inside the
crisper. Leafy vegetables keep best when
stored with the Humidity Control set on
Higher Humidity. Fresh fruits keep best
when stored with the Humidity Control set
on Lower Humidity.
humidity control
Higher
Humidity
Adjusting Crisper Humidity
To Remove the Crisper Drawer for Cleaning:
1. Pull the drawer out until it stops.
2. Lift the front slightly and remove the drawer.
Removing Crisper Drawer
Lower
Humidity