Table of Contents
Advertisement
MENU2-1
Execute CCD color solid adjustment, then record it on ADJ of flash memory
display.
Press shutter button by adjusting the light amount using specified filters in
specified viewer.
When setting mark is displayed it is completed.
MENU2-2
Execute CCD sensitivity check, check result is stored in ADJ area of the picture
flash memory.
Press shutter button by adjusting the light amount using specified filter in
specified viewer.
When setting mark is displayed, it is completed.
MENU2-3
Battery life measurement function.
When shutter button is pressed, it will shoot pictures at interval of about 10
seconds. It will go off when battery goes dead or when power is turned off.
MENU2-4
FOCUS/iris display function
At REC through, present Focus point and iris will be displayed on the LCD.
It will be easy to control Manual Focus precisely.
It will go off when power is turned off.
Do not use 5 to 9 of MENU2 because it will corrupt data stored.
MENU2
1. CCD RGB ADJUST
2. CCD SENS. ADJUST
3. BATT. TEST
4. REC INFO.
5. SELF COPY
6. IMAGE COPY
7. MOTOR SETTING
8. SOKKYO CHANGE
9. NO COMP CAPT
— 12 —
Advertisement
Table of Contents
