Configuring Traffic Segmentation - D-Link DGS-3324SR User Manual

D-Link DGS-3324SR Layer 3 Stackable Gigabit Ethernet Switch
Once you have assigned a priority to the port groups on the Switch, you can then assign this Class to each of the
8 levels of 802.1p priorities. Click Apply to set your changes.

Configuring Traffic Segmentation

Traffic segmentation is used to limit traffic flow from a single port to a group of ports on either a single switch
(in standalone mode) or a group of ports on another switch in a switch stack. This method of segmenting the flow
of traffic is similar to using VLANs to limit traffic, but is more restrictive. It provides a method of directing
traffic that does not increase the overhead of the Master switch CPU.
In the Configuration folder open the QoS folder and click Traffic Segmentation, to view the screen shown
below.
Figure 4- 31. User Priority Configuration window
Figure 4- 32. Current Traffic Segmentation Table
63