Igmp Snooping Table - D-Link DGS-3324SR User Manual

D-Link DGS-3324SR Layer 3 Stackable Gigabit Ethernet Switch

IGMP Snooping Table

IGMP Snooping allows the Switch to read the Multicast Group IP address and the corresponding MAC address
from IGMP packets that pass through the Switch. The number of IGMP reports that were snooped is displayed in
the Reports field.
To view the IGMP Snooping table, click IGMP Snooping Group on the Monitoring menu:
The following field can be viewed:
Parameter
VLAN ID
Multicast Group
MAC Address
Queries
Reports
Note: To configure IGMP snooping for the DGS-3324SR, go to the
Configuration folder and select IGMP. Configuration and other
information concerning IGMP snooping may be found in Section 4 of this
manual under Configuring IGMP.
Figure 6- 18. IGMP Snooping Table
Description
The VLAN ID (VID) of the multicast group.
The IP address of the multicast group.
The MAC address of the multicast group.
A read only field showing the status of the Querier State. Disabled implies
that the Switch is not transmitting IGMP Snooping Query packets, while
Enabled means those packets are being transmitted.
The total number of reports received for this group.
158