Bottom Panel; Power Led - D-Link DCS-5300 User Manual

I/O Connector -
The DCS-5300 provides a terminal block with two pairs of connectors situated on the back panel.
One pair is for input and the other is for output. The I/O connectors provide the physical interface to send and receive
digital signals to a variety of external alarm devices. Please refer to the appendix in this manual for detailed
information.

Bottom Panel

Socket for stand
Note: Located on the bottom panel of the DCS-5300, the socket is used to connect the
camera stand to the Network Camera by attaching the screw head on the camera stand to
the Network Camera.

Power LED

The Power LED (Light-Emitting Diode) is positioned on the right side of the Network Camera lens. As soon as the power
red green
adapter is connected to the Network Camera, the power LED will flash and several times. The DCS-5300 is
green
conducting a self-test. Upon passing the self-test, the LED will turn to indicate a good connection to an Ethernet
red
port or to indicate no connection has been made.
D-Link DCS-5300 User Manual 6