Home Page Screen - D-Link DCS-5300 User Manual

The image from the DCS-5300 should be visible from the Home Page on
your computer monitor. To the right of the image are controls that allow
you to pan and tilt the camera. Pan and tilt can also be controlled within the
image. Clicking on any part of the image will cause the camera to reposition
itself so that the point will be the center of the image.
Return to home position.
Tilt/navigate camera using arrows
Pull down menu:
Select a preset position to move the camera to.
Pan/Tilt Speed:
Select the speed at which the camera will pan or tilt.
Auto Pan:
Pans the camera one full cycle.
Stop:
Stops movement of the camera during pan.
Auto Patrol:
Enables the Auto Patrol feature.
Click the Zoom button below the image to display the digital
zoom control panel. Using the bar, you can select to view the
image up to 400% of the original size.
D-Link DCS-5300 User Manual

Home Page Screen

29