Operation; Before The First Use; Fill In Ground Coffee; Fill Water - Bifinett KH 1112 Operating Instructions Manual

bifinett KH 1112

Operation

Before the First Use

IMPORTANT!
• Never fill more than a total of 1.3 litres
of tap water into the water container.
The minimum quantity in the water
container and the minimum quantity
of brewed coffee in the glass coffee-
pot is 250 ml. Otherwise the coffee
maker could be damaged.
• Disconnect the coffee maker from the
power supply immediately after use.
The coffee maker is only fully current-
less when you pull the plug out of
the wall socket.
• Only pour tap water into the water
container. Otherwise you may dama-
ge the coffee maker.
• open the glass coffee-pot
water contaier.
• Carefully rinse the water container
and the glass coffee-pot with tap
water.
• Fill the glass coffee-pot with max.
1.3 litres of tap water.
• Pour all the tap water into the water
container (fig.C).
• Place the empty glass coffee-pot onto
the hotplate.
• Switch the coffee maker on and wait
until the coffee-making procedure
has finished.
• Empty the glass coffee-pot.
• Switch the coffee maker off by pres-
sing the mains switch again
the power on light goes out.
Then you can use the coffee maker to
make fresh coffee.

Fill in ground coffee

• Swing out the filter holder
• Place an opened size 4 paper filter
into the filter holder. (First fold the
bottom filter paper edge over)
• Fill the ground coffee into the paper
filter.
Allow approx. one level coffee mea-
sure per small cup of ground coffee.
For large cups, allow approx. one
heaped coffee measure per cup. If
the coffee is too strong, you can
reduce the amount of ground coffee
per cup to taste.
• Close the filter holder.

Fill water

and the • Open the water container lid
• Fill the glass coffee-pot
water.
• Pour the tap water for the amount of
coffee required into the water
container (fig.C).
• Close the water container lid
, until
- 6 -
(fig. D).
.
with tap
.