Setting The Clock; Radio Reception; Adjusting Alarm-Timings - E-Bench KH 2185 Operating Instructions Manual

Assembly
Before operating the appliance, ensure that it is in
a serviceable condition.
If not, do not use it.
• Insert the plug into a power socket. Select a power
socket that is at all times easily accessible, so that
the plug can be quickly withdrawn in the event of
a malfunction.

Setting the clock

If you are setting the appliance up for the first time
after inserting a new battery:
Whilst holding the button TIME
• Press several times consecutively, or press and
hold, the button HOUR
• Release the button HOUR
sired hours setting is shown in the display
• Press several times consecutively, or press and
hold, the button MIN
• Release the button MIN
ired minute setting is shown in the display
The programmed time will be accepted automatically
as soon as the button TIME

Radio Reception

• Push the slider switch
• Turn the volume control
• Select the radio band with the band switch
g
AM/FM .
• Now select the desired transmitter through turning
f
the tuning knob .
d pressed down:
u
, to set the hours.
u as soon as the de-
w
.
y
to set the minutes.
y
as soon as the des-
w
d
is released.
j
into the position.
k
to a centre position.
Note:
To improve reception in the FM frequency range,
hold the end of the wire aerial
rections slowly. When you have found the best
reception for the desired transmitter, fix the wire
aerial into this position e.g. with adhesive tape.
For the reception of AM transmitters, the app-
liance has a built in aerial. For improved recep-
tion, alter the position of the appliance in radio
mode.

Adjusting Alarm-Timings

If the clock is set correctly, as described above:
Whilst holding the button AL SET
• Press several times consecutively, or press and
hold, the button HOUR
• Release the button HOUR
sired hours setting is shown in the display
• Press several times consecutively, or press and
hold, the button MIN
• Release the button MIN
. sired minute setting is shown in the display
The programmed alarm time will be accepted auto-
matically as soon as the button ALARM AL SET
is released.
- 5 -
e
in various di-
s held down:
u
, to set the hours.
u as soon as the de-
w
.
y
to set the minutes.
y
as soon as the de-
w
s
.