Extension Cable Connection; Replacement Of Protective Glass, Flash Tube, Modeling Light Led - Profoto B2 250 AirTTL User Manual

extension cable connection

The extension cable is connected in the same manner as the lamp head.
1. First align the two white square dots on the lamp head plug (male), with the dot on the
extension connector (female).
2. Push the plug (male) all the way into the connector (female).
3. Secure by turning the ribbed locking ring on the lamp head plug clockwise.
18
To protect the connectors of the extension cable, it is appropriate to connect the plug to
the outlet of the cable.

replacement of protective glass, flash tube, modeling light LeD

For replacement of the protective glass, flash tube or modeling light LED, contact your local
dealer or distributor for professional service.
www.profoto.com