Table of Contents
Advertisement
TRENDnet User's Guide
9. Right click on the KVM Switcher software icon in the system tray. If your
computer is connected to computer 1 port, the system tray will show an icon
with the number 1. If your computer is connected to computer 2, the system
tray will show and icon with the number 2.
Note: After performing the port switch, you have to wait till the KVM Switch
icon shows the target port before you can perform next switching again.
10. Select the PC that you would like to switch to. The unconnected port or the
active port will be gray-out.
© Copyright 2014 TRENDnet. All Rights Reserved.
11. Click Start Auto-Scan to start auto-scan. Click the Stop Auto-Scan to stop auto-
scan.
TK-215i
8
Advertisement
Table of Contents
