Sas And Sata Drive Led Combinations - HP ProLiant ML350e Gen8 v2 Server User Manual

•
Non-hot-plug drive numbering

SAS and SATA drive LED combinations

Online/activity
LED (green)
On, off, or
flashing
On, off, or
flashing
On
On
Flashing regularly
(1 Hz)
Flashing regularly
(1 Hz)
Flashing
irregularly
Flashing
irregularly
Off
Off
Off
* Do not remove the drive. Removing a drive might terminate the current operation and cause data loss.
Fault/UID LED Interpretation
(amber/blue)
Alternating amber and The drive has failed, or a predictive failure alert has been
blue received for this drive. The drive also has been selected by a
management application.
Steadily blue The drive is operating normally, and it has been selected by a
management application.
Amber, flashing A predictive failure alert has been received for this drive.
regularly (1 Hz) Replace the drive as soon as possible.
Off The drive is online, but it is not active currently.
Amber, flashing The drive is part of an array that is undergoing capacity
regularly (1 Hz) expansion or stripe migration, but a predictive failure alert has
been received for this drive. To minimize the risk of data loss, do
not replace the drive until the expansion or migration is
complete.*
Off The drive is rebuilding, or it is part of an array that is undergoing
capacity expansion or stripe migration.*
Amber, flashing The drive is active, but a predictive failure alert has been received
regularly (1 Hz) for this drive. Replace the drive as soon as possible.
Off The drive is active, and it is operating normally.
Steadily amber A critical fault condition has been identified for this drive, and the
controller has placed it offline. Replace the drive as soon as
possible.
Amber, flashing A predictive failure alert has been received for this drive. Replace
regularly (1 Hz) the drive as soon as possible.
Off The drive is offline, a spare, or not configured as part of an array.
Component identification 17