Table of Contents
Advertisement
Figure 18. Cluster for node with Remote Mirroring
44
NAS Gateway 500 Administrator's Guide
b. Local peer node (if present; a peer node is always present when using local
clustering without Remote Mirroring)
c. Remote primary node (if Remote Mirroring is used)
d. Remote peer node (if present)
Each panel configures the networking cluster parameters. If you selected
Remote Mirroring, Figure 18 appears. If you did not select Remote Mirroring,
Figure 19 on page 45 appears. The following fields appear only if the Remote
Mirroring feature is selected:
v Mirrored Volumes File serving IP addresses
v Mirroring Mode
v Remote Priority Node
Advertisement
Table of Contents
