IBM TotalStorage NAS Gateway 500 Administrator's Manual page 304

282
NAS Gateway 500 Administrator's Guide
Table 29. Network SMIT fastpaths and WebSM access (continued)
Command Description
lssrc Get the status of a subsystem, a group of subsystems, or a
subserver.
SMIT fastpath
WebSM
mktcpip Set the required values for starting TCP/IP on a host.
SMIT fastpath
WebSM
netstat Show network statistics.
SMIT fastpath
WebSM
ping Send an echo request to a network host.
SMIT fastpath
WebSM
namerslv Directly manipulate domain name server entries for local resolver
routines in the system configuration database.
SMIT fastpath
WebSM
nfso Manage Network File System (NFS) tuning parameters.
SMIT fastpath
WebSM
no Manage network tuning parameters.
SMIT fastpath
WebSM
refresh Request a refresh of a subsystem or group of subsystems.
SMIT fastpath
WebSM
startsrc Start a subsystem, a group of subsystems, or a subserver.
SMIT fastpath
WebSM
stopsrc Stop a subsystem, a group of subsystems, or a subserver.
SMIT fastpath
WebSM
smit inet
NAS Management→NAS System →Node(Server
IP Address)→Network→TCP/IP (IPv4 and
IPv6)→Subsystems
smit mktcpip
NAS Management→NAS System→Node(Server
IP address)→Network→TCP/IP (IPv4 and IPv6)
→Protocol Configuration→Set up basic TCP/IP
configuration.
N/A
N/A
N/A
N/A
smit namerslv
N/A
N/A
N/A
N/A
N/A
N/A
N/A
There are many fastpaths.
NAS Management→NAS System→Node(Server
IP Address)→Network→TCP/IP (IPv4 and IPv6)
→Subsystems→(right-click subsystem)→Activate
There are many fastpaths.
NAS Management→NAS System→Node(Server
IP Address)→Network→TCP/IP (IPv4 and IPv6)
→Subsystems→(right-click
subsystem)→Deactivate