Auto Mode Operation; Temperature Adjustment During Auto; Fan Speed - Mitsubishi Heavy Industries DXK09Z5L-S User Manual

AUTO mode operation

■ Automatically selects the operation mode (COOL, HEAT, DRY) depending on the room temperature when switched on.
Display in OFF status
• The current time and preset OPERA-
TION MODE are displayed while the
air conditioner is turned off.

Temperature adjustment during AUTO

■ Air temperature adjustment is possible even during automatic operation. There are 6 levels of adjustment possible with the
During automatic operation, 24°C is preset both for heating and cooling.

FAN SPEED

■ You can choose the capacity of your air-conditioner
when heating mode, cooling mode or fan mode.
Operation capacity by your choice
Set automatically by microcomputer
Powerful operation with high capacity
Standard operation
Energy-saving operation
When the unit is not in AUTO mode:
1
Press MODE button.
Move the [
Point the remote control toward the air-conditioner, and
2
Press the ON/OFF button.
To stop:
NOTE
• In case air is not blowing out during the operation.
When a change in temperature is required.
1
Press the
When it is a little cold
Press the button.
■ Each time the
button is pressed, the switch over occurs in the following order
–6 → –5 → ............ –1 → ±0 → +1 ............ +6.
When +6 is indicated, even if the
When it is a little hot
Press the button.
■ Each time the
button is pressed, the switch over occurs in the following order
+6 → +5 → ............ +1 → ±0 → –1 ............ –6.
When –6 is indicated, even if the
-6 -5
Setting
temp.(°C) 18 19
Press the FAN SPEED button.
Move the [ mark] to the preferred fan speed position.
FAN SPEED
AUTO
AUTO
HI
NOTE
MED
LO
• When changing FAN SPEED from HI to LO, the sound of
refrigerant flowing may be heard.
– 10 –
mark] to the (Auto) position.
Press the ON/OFF button.
• If you do not want the AUTO mode program, change
to COOL, HEAT, DRY or FAN instead of AUTO.
• Airflow direction adjustment procedure.
or button.
button is pressed, the indicator does not change.
button is pressed, the indicator does not change.
Remote Control display
+ 0
-4 -3 -2 -1 +1
20 21 22 23 24 25
HI MED LO
Page 21
Page 11
Page 12
button or the button.
+2 +3 +4 +5 +6
26 27 28 29 30