Update the Net-Func Software
4. Select "Execute"
Caution
Once the version up is completed, the REC lamp will stop blinking and [Version Upgrade OK
Turn Power Off] will appear on the screen.
段階
目安の所要時間
When the Version Update Procedure is Terminated
Phase1
If there is a error during the version update, [Version Upgrade NG: Cannot Read. Power
Off] will appear on the screen. Reboot the camera and redo the whole process from the
Phase2
beginning.
When the Version Update Failed
[Version Upgrade Error!!] will appear on the screen. Redo the whole process from the
beginning. If the error still appears, camera might need repair, please contact your local
Sony service center.
約3分
約9分