Edid Write In And Adc Correction And Parameter Adjustment; Edid Write In; 8-1.1 Edid Tools - Olevia 237T Service Manual

TITLE
LCD TV For 237-T11

8. EDID write in and ADC correction and Parameter Adjustment

8-1 EDID write in

8-1.1 EDID tools

1. PC（Notebook）
2. Software（EDID Write EEprom20060816.exe）and confirm Personal computer hard disk
Have 2 files (1. C:\EDID Editor(including Hex files) 2.C:\LCD TV\DATA(product and
record had No.)
8-1.2 EDID write in
3. EDID PCBA tool、USB cable、RS232 mini din、Print cable、VGA cable
Step 1
MDA3
Step 7
1. Open Labview EDID Writ Eeprom20060816 file, and confirm software Keep Running.（Refer
Step 1）
2. choice RS-232 (PC System)Port No.(Refer
3. press Set Model button（Refer
Step 5）
4. confirm EDID Jig PCBA (printer port and USB A-B Line connect to PC, HDMI line to TV first ,
MinDim RS-232 to TV)
5. and then press Button（Refer
6. First write HDMI EDID code , if finish OK you can find green light.（Refer
7. And have a message that change EDID Jip PCBA VGA Cable to TV.(HDMI line must leave
PCBA Jig.)
Service Manual
Step 4
Step 5
4）, and key in 237-T11. and confirm Scalar solution （Refer
Step
Step 6）, then open a save file path in widow.
operate Barcode scanner scan S/N stick No.
,if write OK you can fine green light
Company Confidential-DRAFT
Doc No.
Version
Page
Step 3
Step 6
Step 2)，choice burn in type (Refer
SM_237-T11_19Nov07
1.2
38/72
Step 2
Step 3)
Step 7）
and show the message