Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Olevia 237T
Summary of Contents for Olevia 237T
- Page 70 Model WM-30D PANEL DISPLAY MOUNT Thanks you for purchasing the Syntax panel display mount To ensure the correct usage, please read and follow the instructions manual thoroughly. Please store the instructions in a safe place for future reference. All mounts and adapters carry a limited lifetime warranty from ship date against defects in material and workmanship. We are not liable for improper installation that results in damage to mounts, adapters or presentation equipment.
- Page 71 INSTALLATION LOCATION WARNING The wall where the wall mount is to be installed must be capable of long-term support of the total load of the panel display and wall mount. Measures should al so be taken to ensure sufficient strength to withstand the force of earthquakes, vi bration and other external forces.
- Page 72 1. FASTEN MOUNTING PLATE TO WALL The bracket must be secured to the wall studs capable of at least (4) times the weight of the unit. The wall bracket should be mounted at the same horizontal center line as the display center line ( viewing horizontal center line). Using the four lag bolts( E ) and washers supplied ( D ) Level and secure the mounting plate to the center of the wall studs Pre drill 3/16”...
- Page 73 3. MOUNT THE DISPLAY TO THE WALL MOUNT BRACKET Lift the display with the brackets attached, onto the wall plate. See Fig4 Position the top and bottom into the slots. See fig 5 and Fig 6 Insert the locking bar (C) as shown in fig 5 with the locking holes facing up to match the holes in the wall mount bracket (B) . Make sure the display brackets engage the rails on the wall mount bracket (B) See fig 5.