Canon iR5000 Service Manual page 740

ADJ-S
Use it to adjust the scanner home position.
Range of 55 to 70 (A change of '1' causes a shift of 0.1 mm.)
adjustment
Caution • Execute this mode if the copyboard glass is soiled so that the standard
white plate will be read avoiding the soiled area.
• If you changed the adjustment value, be sure to open and then close the
ADF (for HP search).
ADJ-Y-DF
Use it to adjust the ADF read start position (ADF horizontal registration) in
scanning direction.
Range of 100 to 400 (unit: 0.1 mm)
adjustment
STRD-POS
Use it to adjust the CCD read position for stream reading.
Range of 30 to 60 (A change of '1' causes a shift of 0.1 mm.)
adjustment
COPYRIGHT © 2000 CANON INC.
Download Free Service Manual at http://printer1.blogspot.com
Vertical
size plate
Standard white plate
Lower setting
Lower setting
Higher setting
Feed direction
2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000
CHAPTER 5 SERVICE MODE
HP sensor
Copyboard glass
Higher setting
F05-401-05
Print image
F05-401-06
COPIER>ADJUST
5-47 T