Kodak i100 Series User Manual page 14

Simultaneous output
bi-tonal and grayscale
duplex
Single output
bi-tonal only simplex
A-61517 October 2004
This job stream is available for i160 Scanners.
1. Prepare documents.
2. Start the scanner to do simultaneous output bi-tonal and
grayscale duplex scanning (front bi-tonal, front grayscale, rear
bi-tonal, rear grayscale).
3. Setup the scanner to retrieve bi-tonal images first.
4. Enable the scanner and start polling.
Loop
Read front bi-tonal image header
Read front bi-tonal image
Read front grayscale image header
Read front grayscale image
Read rear bi-tonal image header
Read rear bi-tonal image
Read rear grayscale image header
Read rear grayscale image
End loop
This job stream is available for all i100 Series Scanners.
1. Prepare documents.
2. Start the scanner to do bi-tonal scanning.
3. Setup the scanner to retrieve bi-tonal images.
4. Enable the scanner and start polling.
Loop
Read front bi-tonal image header
Read front bi-tonal image
End loop
2-7