Connecting To A Wireless Network - Lenovo MIIX 3-1030 User Manual

Chapter 2. Starting to use Windows 8.1

Connecting to a wireless network

Enabling wireless connection
To confirm that Airplane mode is disabled, go to the desktop and check the notification area.
If you see the
wireless function is enabled.
Note: Airplane mode is disabled by default.
If Airplane mode is on, do one of the following to enable the wireless function:
• Press Fn + Backspace to disable Airplane mode (located on the folio case).
• Open the charms, select Settings
toggle the Airplane mode switch to Off.
Connecting to a wireless network
After wireless has been enabled, the computer will scan for available wireless networks and
display them in the wireless network list. To connect to a wireless network, click the network
name in the list, and then click Connect.
Note: Some networks require a network security key or passphrase for connection. To connect to one of
those networks, ask the network administrator or the Internet Service Provider (ISP) for the security
key or passphrase.
icon displayed on the lower right, then Airplane mode is on. Otherwise,
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
to open the Network configuration page, and then
22