Kodak 1500 User Manual page 36

9. Set the barcode area:
X-Position to Begin Search—must be 10 mm (0.39 inches) to
the left of the first barcode data to be read.
Y-Position to Begin Search—the length from the top of the
document to the upper edge of the barcode.
Width of area on page to search—set this value 20 mm
(0.79 inches) greater than the actual width of the barcode.
Length of area on page to search—set this value equal to the
entire barcode search length. If the search area is large
(e.g., an 8.5 x 11-inch region) then the scanning time will
increase considerably.
Width
X coordinate
10 mm 10 mm
ulx
uly Y coordinate
Length (>10 mm)
Document
A-63055 December 1999 30