3000 Series Overlays; Overlay / Frame Overlay Panel; Panel Preparation - U-Line U-3018WCOL-00 Install Manual

8 3000 Series Overlays

Overlay / Frame Overlay Panel

IMPORTANT IMPORTANT
Due to differences in surrounding cabinetry the panel may
not perfectly align with door. The procedure below is
designed to provide a finished overlay panel that
seemlessly integrates with surrounding cabinetry.

Panel Preparation

A full overlay door panel completely covers the door frame and
provides a built-in appearance.
3018 and 3036 Series
BACK SURFACE MUST HAVE AMPLE FLAT SURFACE
TO MOUNT OVERLAY PANEL FLAT AND WITHOUT
INTERFERENCE
17 1/2"
Solid Overlay
Overlay & Frame Overlay Panel Dimensions
3/4"
MIN
30"
U-Line Door Panel Installation Guide
IMPORTANT IMPORTANT
• The door panel must not weigh more than 20lbs.
• It is important to ensure that all drilled holes are drilled to the
correct depth in order to avoid splits in the wood when
hardware is installed.
• Appliance will need up to 34 1/2" to the under side of the
counter to leave room for leveling adjustments.
1. Cut the panels to the dimensions listed in the appropriate
diagram below.
2. Optional: Stain or Finish panel to desired stain or color. Be sure
to closely follow the instructions provided by the manufacturer.
IMPORTANT IMPORTANT
If finishing frame overlay, both sides of overlay must be
finished in order to prevent warping.
3. Optional: Install handles and hardware.
BACK SURFACE MUST HAVE AMPLE FLAT SURFACE
TO MOUNT OVERLAY FRAME FLAT AND WITHOUT
INTERFERENCE
2 3/4" Min
Frame Overlay
3/4"
MIN
17 1/2"
30"
7