Panel Installation - U-Line U-3018WCOL-00 Install Manual

3024 Series
BACK SURFACE MUST HAVE AMPLE FLAT SURFACE
TO MOUNT OVERLAY PANEL FLAT AND WITHOUT
INTERFERENCE

Panel Installation

1. Fully open door,
2. Starting at corner, pull gasket
away from door.
3. Continue to pull gasket free
from gasket channel.
4. Upon removal, lay gasket
down on a flat surface.
23-1/2"
Solid Overlay
U-Line Door Panel Installation Guide
3/4"
BACK SURFACE MUST HAVE AMPLE FLAT SURFACE
MIN
TO MOUNT OVERLAY FRAME FLAT AND WITHOUT
INTERFERENCE
2 3/4" Min
30"
Frame Overlay
If working with the door that houses the display, make
certain the display cable remains securely seated in the
inner door channel, see below.
Inner
Door Channel
23-1/2"
IMPORTANT IMPORTANT
Display
Cable
3/4"
MIN
30"
8