1. Manuals
  2. Brands
  3. TEC Manuals
  4. Grill
  5. Sterling
  6. Owner's manual

TEC Sterling G-Series Owner's Manual

Infra-red
Hide thumbs Also See for Sterling G-Series:
Table of Contents

Advertisement

Quick Links

INFRA-RED
Sterling
®
G-Series
OWNER'S MANUAL
Thermal Engineering Corporation
P.O. Box 868, Columbia, South Carolina 29202-0868
2741 The Boulevard, Columbia, South Carolina 29209
Telephone: (803) 783-0750 Toll-free (800) 331-0097
Fax : (803) 783-0756 Toll-free fax: (888) 581-0286
Website: www.tecinfrared.com

Advertisement

Table of Contents
loading

Related Manuals for TEC Sterling G-Series

Summary of Contents for TEC Sterling G-Series

  • Page 1 INFRA-RED Sterling ® G-Series OWNER’S MANUAL Thermal Engineering Corporation P.O. Box 868, Columbia, South Carolina 29202-0868 2741 The Boulevard, Columbia, South Carolina 29209 Telephone: (803) 783-0750 Toll-free (800) 331-0097 Fax : (803) 783-0756 Toll-free fax: (888) 581-0286 Website: www.tecinfrared.com...
  • Page 2 INSERT PAGE HERE...
  • Page 3 Warnings Notices Notice to Customer FOR YOUR SAFETY PRIOR TO INSTALLING AND USING THIS APPLIANCE, READ THIS MANUAL FULLY AND CAREFULLY. RETAIN IF YOU SMELL GAS: THIS MANUAL FOR FUTURE REFERENCE AND HAVE AVAILABLE AT ALL TIMES. ENSURE THAT ALL 1.
  • Page 4 UNDER THIS WARRANTY We will, at our option, repair or replace any component part deemed by TEC to be defective when returned to a TEC authorized dealer or to our factory, freight prepaid, within the warranty period.
  • Page 5 We would be grateful if you would take a few minutes to complete it and send it to us -- after you’ve used your new TEC a few times. We’ll send you a free TEC apron as a token of our...

  • Page 6: Table Of Contents

    Appendix D: Troubleshooting ........23 Propane Installation Code CAN/CGA-B149.1. Cabinet Base Mounting Instructions The Sterling G-Series grill designed for cabinet mounting is packaged separately from the Cabinet Base. Follow the procedures below to mount the Grill Housing onto the Cabinet. Two open-end 7/16” wrenches are required.

  • Page 7: General Overview

    Installation A ssembly continued 1. Set the Cabinet Base upright on a level surface, then General Overview place the Grill Housing onto the Cabinet Base and You will need to unpack the unit and place the Radiant align the mounting holes of both. Glass Emitters , the cooking grids and the warming rack 2.

  • Page 8: Gas Connection

    This includes all Natural gas and permanently ■ Gas cylinders come with a pressure relief valve. If a installed units. Gas regulators specified by TEC should be cylinder is subjected to excessive heat, the relief valve used at all times. Refer to Table A.1 below for gas supply will open and let highly flammable gas vapor and/or liquid escape.

  • Page 9: Installing Your Lp Gas Cylinder

    Valve for any damage, dirt or debris. Remove dirt or NOTICE: FOR YOUR SAFETY, ONLY USE THE debris. Replace any damaged parts with TEC REGULATOR AND HOSE ASSEMBLY PROVIDED AS specified replacement parts prior to use. ORIGINAL EQUIPMENT WITH YOUR GRILL OR, IF 6.

  • Page 10: Removing Your Lp Gas Cylinder

    Gas Connection continued Removing Your LP Gas Cylinder Permanent Installation CAUTION: GAS PIPING TO YOUR GRILL MUST BE IN Procedure: ACCORDANCE WITH LOCAL CODES. IN THE ABSENCE 1. Close the Cylinder Valve by turning the Handwheel OF LOCAL CODES, USE THE NATIONAL FUEL GAS clockwise until it stops.

  • Page 11: Operation

    OBSTRUCTIONS PRIOR TO EACH USE. IF ANYTHING IS FOUND, CLEAN THE TUBES COMPLETELY. A CLOGGED TUBE CAN LEAD TO A FIRE BENEATH THE GRILL. NOTICE: NEVER OPERATE THE STERLING G-SERIES GRILL WITHOUT THE RADIANT GLASS EMITTERS HIGH PROPERLY INSTALLED AS DESCRIBED ON PAGE 5.

  • Page 12: Burner Ignition With Match

    Operation continued Burner Ignition With Match If your spark ignition system is not working properly, the burners may be ignited manually, using a match. Use the following procedure to do so. CAUTION: DO NOT HOLD A MATCH IN YOUR HAND ABOVE A BURNER WHEN LIGHTING THE BURNER MANUALLY.

  • Page 13: Base Brake

    This Base Brake condition is unsafe; therefore, adjustments should only be Your Sterling G-Series cabinet comes equipped with a made with the Burner Output Knob positioned at the Base Brake mechanism for use while the grill is LOW setting while keeping a close eye on changes.

  • Page 14: Infra-Red Cooking

    The intense infra-red energy generated by your TEC grill 4. For best results, close the hood. has many advantages. For example, food is evenly cooked 5. When you are finished cooking, be sure to turn all throughout.

  • Page 15: Sample Cooking Methods

    Infra-red Cooking continued Sample Cooking Methods Unless otherwise noted, these cooking guidelines require cooking with hood open. Use this chart as a cooking guide. Cooking times may vary, depending on thickness of food. FOOD CONTROL SETTING TOTAL COOKING TIME Steak 1" Thick High fire 2 min.

  • Page 16: Maintenance And Cleaning

    Radiant Maintenance Glass Emitter. The Sterling G-Series requires very little maintenance. IMPAIRED VENTILATION OF HOT AIR FROM GRILL - order for the burners to function properly, hot air created However, grill inspection of orifice openings and venturi by the burners must have a way to escape the grill.

  • Page 17: Spark Module Battery Replacement

    If you need Replacement Parts or Accessories, contact ceramic cleaning creams. The following are the cleaning your TEC Authorized Dealer. See Appendix C of this creams approved by the glass manufacturer: ■ ELCO/Weimann CookTop Cleaning Creme manual for a listing of Replacement Parts and ■...

  • Page 18: Appendix A: Build-In Specifications

    Appendix A: Build-in 16” Clearance from rear of unit above trim panel to combustible Specifications construction. 9 1/2” minimum clearance for the 1 1/2” diameter hole hood to open to non-combustible for gas line construction. 1” 16” 12” Clearance from sides of unit above trim panel to combustible construction.

  • Page 19: Appendix B: Accessories

    Figure 14 . Rotisserie 2. Position the Rotisserie Motor on the Rotisserie The TEC Rotisserie has not been tested by CSA International. Bracket and plug it into a grounded outlet. Rotisserie Use CAUTION: DO NOT USE THE ROTISSERIE IN THE RAIN.

  • Page 20: Deep Fryer/Steamer

    Figure 15. Deep Fryer/Steamer FLAMING OIL! The TEC Deep Fryer has not been tested by CSA International. 1. Remove the Cooking Grid over the burner that will be used to operate the Deep Fryer/Steamer. It does not matter which burner you use for this.

  • Page 21: Steamer

    3. Fill the bottom of Fryer with " to " of water or The TEC Deep Fryer has not been tested by CSA International other non-flammable liquid (wine, etc.). Repeat this throughout the cooking process so that the liquid level is maintained.

  • Page 22: Griddle

    Figure 17. Griddle Griddle Use The TEC Griddle has not been tested by CSA International. 1. Remove the Cooking Grid of the desired burner. 2. Place the Griddle over the burner. 3. Follow the Burner Ignition Procedures at pages 9 and 10 and after the burner ignites, operate the grill for on high 5 minutes.

  • Page 23: Wok

    Appendix B: Accessories continued Enjoy stir-fry cooking on your TEC grill with the Wok accessory. Using high temperature, you can quickly cook chicken, beef, shrimp or assorted vegetables. After each use, the Wok should be thoroughly washed with soap and warm water and dried and rubbed with cooking oil to prevent rusting.

  • Page 24: Appendix C: Replacement Parts

    Appendix C: Replacement Parts ORDER NO. DESCRIPTION RFM1648............Burner Assembly STBP ..............Burner Head RHW0407 ............Radiant Glass Emitter STBCV............Gas Valve, Burner Output RHW0814 ............Knob, Burner RFM1635............Cooking Grid (one grid) RFM2305 (for Sterling G2000)......Drip Tray RFM2323 (for Sterling G2000)......Warming Rack RFM2304 (for Sterling G2000)......Heat Shield RFM1630 (for Sterling G3000)......Drip Tray RFM1632 (for Sterling G3000)......Warming Rack RFM1622 (for Sterling G3000)......Heat Shield...

  • Page 25: Appendix D: Troubleshooting

    Allow burner to cool and inspect very closely for cracks Cracked ceramic. (which may be nearly invisible). If cracks are found, contact TEC Authorized Dealer to replace burner head. Contact TEC Authorized Dealer. Replace fiber None of the above. Probable cause is leak in insulation packing under burner head.
  • Page 26 Notes...

Table of Contents