Preference > Vcr; System > System Info - Sanyo HVR-DX625H Instruction Manual

Preference > VCR
This feature enables you to search for Index marks or
specific times on your VHS tapes.
1 While 'Preference' is selected, press [†] to select
'VCR'.
2 Press [ENTER].
3 The 'VCR' submenu is displayed.
4 Select 'Index+', 'Index–' or 'Go To Zero'.
If you select 'Index+' (or 'Index–') and press
[ENTER], your DVD Recorder+VCR will locate
your index mark and begin playback.
If you select 'Go To Zero' and press [ENTER],
your DVD Recorder+VCR will wind to the position
0:00:00 and stop.
Preference
ENTER
The VCR menu is activated only when a video
cassette tape is inserted and DVD Recorder+VCR
is in VCR mode.
28
Video Index +
Audio Index -
Parental Control Go To Zero
Change Password
Auto Setting
VCR
†
Confirm Back Exit
MENU SETUP
System > System Info
'System Info' helps service personnel identify key
firmware information about your DVD Recorder + VCR
in case service is required.
System
ENTER
System > System Info
ENTER
Setup menu
System Info
†
DivX (R) VOD DRM
Restore Default
Confirm Back Exit
MENU SETUP
Version
FD300007TCU-070716
Loader Version
BH07T A100
Micom Software
02.09
Confirm Back Exit
MENU SETUP