Topfield TBF-200HD User Manual page 51

NOTE
1. In this feature, if you can not press the [OK] button to save the code in time, you can press [P+] or [P-]
button to pause search when your TV to be turned OFF, then press the [P+] button to forward search and
TV, then press [OK] button to save and go out the search state.
It could take upto 10 minutes, please wait patiently.
Checking the TV code
You can check the TV CODE of your TV as below:
1) Press TV button on your remote control.
2) Key in 9-9-0 to start this function. The light on your
3) According to priority, press the number 1,2,3 or 4.
For example, if the TV CODE is 1530:
4. After pressing the 4 key: the remote control light fast
NOTE
In this feature, you only can press the 1~4 number keys.
If you press other button, the remote control will exit this feature automatically.
Multi-control for Volume
You can control your TV's Volume +/- or MUTE when your remote control working in STB state.
To Enable or Disable this function:
1) Press TV button on your remote control.
2) Hold down OK and Red button together for about
4) Now this function is Enabled.
Now, when your remote control is in STB state, you can control your TV's Volume +/- or MUTE directly.
To Disable this function, key in 9 – 9 – 2.
feature to search full code library.
1 time
5 times
3 times