Connecting To Your Television Set - Topfield TBF-200HD User Manual

2.4.2 Connecting to your television set

To use the HDMI output
To use the Composite video output
NOTE
RF LOOPOUT may also be linked to your television, VCR,
or DVD recorder to loop an analogue signal.
For all the following connections of the digital receiver, we rec-
ommend you to use the first connector to get the best picture
quality. If your television does not have a matching connector,
then use the next connector in the following order for a better
picture quality.
1. HDMI connector (HDMI)
2. Composite connector (VIDEO)
You should configure audio and video settings after connect-
ing up the digital receiver. See
In this case, you do not have to make audio connection because
it can output stereo audio or digital audio as well.
2.4 Connecting up your digital receiver 11
§4.2
If you have a high definition television set,
you should use an HDMI cable for best re-
sults. Plug one end of the cable into the HDMI
socket on the digital receiver, and plug the
other end into the matching socket on your
television.
You need to obtain a Composite video cable
(RCA cable) to use the Composite video out-
put. Plug one end of the cable into the VIDEO
(yellow) socket on the digital receiver, and
plug the other end into the matching socket
on your television.
for a detailed description.