Table of Contents
Advertisement
6.3 Safety instructions for maintenance
o Check the mains connection cable for damage from time to time. Never operate the
device when the cable is damaged. A damaged cable must immediately be replaced
by customer service or a qualified electrician to avoid dangers.
o In case of damage or malfunction, please contact your stockist or our customer
service centre. Pay attention to the troubleshooting tips in pt. 7.
o Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.
Regular greasing:
o The carriage is to be greased regularly with a natural technical grease. In order to do
so put the slicer on its side and grease both ends of the carriage axle. Move the
carriage forward and backward in order to distribute the grease evenly. Remove the
excess grease with a cloth.
7. Possible Malfunctions
Problem
Device does not start
despite START button
being pushed
Too much resistance
during cutting
Slices are frayed
and/or have irregular
shape
Carriage moves
incorrectly
Knife cannot be
sharpened correctly
- 36 -
Cause
•
No power
•
Knife not sharp enough
•
Knife not sharp enough
•
Knife worn out
excessively
•
Carriage axle not
greased enough
•
Sharpener elements are
worn out
Solution
•
Check whether the
device is plugged
correctly into a socket
•
Grind the knife
•
Grind the knife
•
Contact authorized
service point
•
Grease carriage axle
•
Contact authorized
service point
Advertisement
Table of Contents
