Icom IC-M91D Service Manual Addendum page 19

MAIN UNIT
1. REMOVING THE MAIN UNIT (Continued)
8) Disconnect flat cables from J271, J280 and J290,
and then remove the MAIN UNIT from the rear pan-
el.
BE CAREFUL about the fl atl cables when separating the
MAIN UNIT from the chassis.
MAIN UNIT
J271
FLAT
CABLE
Rear panel
MAIN UNIT
MAIN UNIT
J280
MAIN UNIT
J290
2. REMOVING THE RF UNIT
1) Remove 2 screws and antenna nut from the rear
panel.
Rear panel
2) Remove chassis from the rear panel.
Rear panel
3) Remove 3 screws from the CHASSIS, and then
remove the RF UNIT from the CHASSIS.
Screws
3 - 2
Antenna nut
Remove with;
"ICOM Driver (K)"
(8960000110)
Screws
CHASSIS
with the RF UNIT
RF UNIT
CHASSIS