APW Wyott VSX Installation And Operating Instructions Manual

Apw/wyott food service vertical contact bun grill toaster installation and operating instructions vsx

Advertisement

Quick Links

INSTALLATION
AND
OPERATING
INSTRUCTIONS
X'Vert
Model:
VERTICAL CONTACT BUN GRILL TOASTER
TOASTER MUST BE KEPT CLEAR OF COMBUSTIBLES AT ALL TIMES
FOR YOUR SAFETY: Do not store or use gasoline or other flammable vapors and
!
liquids in the vicinity of this or any other appliance.
WARNING: Improper installation, adjustment, alteration, service or maintenance can
!
cause property damage, injury or death. Read the Installation, Operating and
Maintenance Instructions thoroughly before installing or servicing this equipment.
Initial heating of toaster may generate smoke or fumes and must be done in a well ventilated area.
Overexposure to smoke or fumes may cause nausea or dizziness.
This equipment has been engineered to provide you with year-round dependable service when used
according to the instructions in this manual and standard commercial kitchen practices.
Phone:
(214) 421-7366
Fax:
(214) 565-0976
Toll Free: (800) 527-2100
Website: www.apwwyott.com
E-mail:
info@apwwyott.com
R
TM
VSX
INTENDED FOR OTHER THAN HOUSEHOLD USE
RETAIN THIS MANUAL FOR FUTURE REFERENCE
ANSI/NSF4
APW / WYOTT
729 Third Avenue
Dallas, TX 75226
!
!

Advertisement

Table of Contents
loading

Summary of Contents for APW Wyott VSX

  • Page 1 INSTALLATION OPERATING INSTRUCTIONS X’Vert Model: VERTICAL CONTACT BUN GRILL TOASTER INTENDED FOR OTHER THAN HOUSEHOLD USE RETAIN THIS MANUAL FOR FUTURE REFERENCE TOASTER MUST BE KEPT CLEAR OF COMBUSTIBLES AT ALL TIMES FOR YOUR SAFETY: Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
  • Page 2: Owner's Information

    The user places both buns into the top of the toaster and two perfectly caramelized, warm buns (4 halves) will slide out of the bun chute. The VSX will toast two buns in 8, 20 or 30 seconds (depending on your model).
  • Page 3: Specifications

    Failure to replace a damaged cord will void the warranty. Overall Dimensions: Electrical Ratings: VSX: 24”H x 19”W x 11” D VSX: 208V - 2570W, 12.5 Amps 60HZ (61 cm x 48 cm x 28 cm) VSX: 240V - 3420W, 14.5 Amps 60HZ...
  • Page 4: Operation

    Bun Thickness Dials to achieve desired brownness and temperature. Bun Thickness Adjustment The VSX is designed to accommodate a variety of different products. Adjust for product thickness by setting the Bun Thickness Dials on the side of the toaster to the appropriate setting.
  • Page 5 HEEL IN CROWN BACK IN FRONT DISCHARGE VSX-10 Temperature Control (See Figure 6) NO HEAT: When the knob is pointed here, all heat is cut off from the platen. The conveyors will run, but the platen will not heat. PILOT: Illuminated when power is being applied to heater.
  • Page 6 Cleaning Instructions Toaster is for DRY BUNS ONLY. the toaster. Note: To save time at closing (it will take 15 minutes for toaster to cool down), you might want to have the day shift clean the toaster. Turn off (7) Main Power Switch (See Fig. 7). Allow toaster to cool down. Remove (6) Bun Slide and (1) Top Cover (See Fig.
  • Page 7: Troubleshooting Guide

    6. TROUBLESHOOTING GUIDE Always ask and check the following: Service Hotline (800) 733-2203...
  • Page 8 Problem Possible Cause Corrective Action (See page 9)
  • Page 9 Problem Corrective Action Possible Cause Manual Reset Thermostat The manual reset is a device that provides thermal protection for the platen. In the event that the main controller or power relay fails to regulate the heat on the platen, the manual reset thermostat will break the electrical connection to the platen.
  • Page 10: Preventative Maintenance Schedule

    7. PREVENTATIVE MAINTENANCE SCHEDULE Tools required: Daily: Heat Resistant Gloves, Standard Cleaner, Standard Sanitizer, Cleaning Pad. Weekly: Lubricant 3-6 Months : Needle Nose Pliers, Standard Cleaner, Standard Sanitizer, Cleaning Pad Yearly: Phillips Screwdriver, Standard Lubricating Oil, Needle Nose Pliers 1) Preventative Maintenance - WARNING! Toaster may be hot.
  • Page 11 PROPER LONG TERM PERFORMANCE. PREVENTATIVE MAINTENANCE OF THE INTERNAL COMPONENTS IS A RECOMMENDED PROCEDURE THAT MUST BE COMPLETED BY A KNOWLEDGEABLE TECHNICIAN, SUCH AS AN APW WYOTT AUTHORIZED SERVICE TECHNICIAN. PREVENTATIVE MAINTENANCE IS THE RESPONSIBILITY OF THE OWNER, AND IS NOT COVERED UNDER THE WARRANTY AGREEMENT PROVIDED WITH THE TOASTER.
  • Page 12 IMPORTANT FOR FUTURE REFERENCE Please complete this information and retain this manual for the life of the equipment. For Warranty Service and/or Parts, this information is required. Model Number Serial Number Date Purchased Notes...
  • Page 13: Wiring Diagrams

    FIGURE 9: WIRING DIAGRAM - VSX-10 TOASTER PILOT LIGHT THERMOSTAT TOP VIEW FRONT SWITCH MAIN POWER WHITE OR BLUE WIRE FROM CORD BLACK OR BROWN WIRE GREEN WIRE FROM CORD FIGURE 10: WIRING DIAGRAM - VSX-20 TOASTER MANUAL RELAY LIMIT SW...
  • Page 14: Parts List & Exploded View

    9. PARTS LIST & EXPLODED VIEW FIGURE 11: EXPLODED VIEW VSX-10/20 TOASTER VSX-10 VSX-20...
  • Page 15 Cordset, 6-20P 90° Plug, 5-Ft Long 88993 Screw 10-32X3/8 Phillips Self-Locking 89003 Bolt 1/4-20X1/2" HEX 89076 Lock Washer 1/4" Internal 89111 Strain Relief Bushing .875"DIA 89488 Main Power Switch 20A 277V VSX-10/20 TOASTER VSX-20 VSX-10 VSX-10 VSX-20 VSX-20 VSX-20 VSX-20 VSX-20 VSX-20 VSX-20...
  • Page 16 10. PROCEDURE FOR CONVEYOR BELT TRACKING FIGURE 12: Silicone Belt Tracking Adjustment...
  • Page 19: Conveyor Belt Adjustment

    13. CONVEYOR BELT ADJUSTMENT FIGURE 13: PROCEDURE FOR CONVEYOR BELT ADJUSTMENT (TRACKING)

This manual is also suitable for:

X'vert vsx

Table of Contents