TRUCTIONS IN THE MANUAL ACCOMPANYING THE UNIT. THE SOFTWARE OF THIS DVD PLAYER IS NOT UPDATABLE. ANY CHANGES MADE TO THE SOFTWARE OF THIS DVD PLAYER WILL MAKE THE WARRANTY VOID, AND COULD SERIOUSLY DAMMAGE ITS FUNCTIONING. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE.
1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions should be retained for futu- re reference. 3. Head Warnings All warnings on the product and in the operating instructions should be adhered to.
Page 6
Introduction Important Safety Instructions A) When the power-supply cord or plug is damaged, B) If liquid has been spilled, or objects have fallen into the product, C) If the product has been exposed to rain or water, D) If the product does not operate normally by following the ope rating instructions.
Introduction Caution Please use the original box and packing materials for safe transportation of this product. It is normal for the cover and rear panel to become warm after the player has been operating for an extended period of time. Do not move this product during playback.
The product complies with the KODAK Picture CD format and will display KODAK Picture CDs. The "KODAK Picture CD Compatible" logo is a trademark of Eastman Kodak Company and is used with permission. Manufactured under license from Dolby Laboratories."Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
Front Panel and Rear Panel Illustration POWER DISC TRAY OPEN/CLOSE SCREEN SENSOR PLAY PAUSE STOP PREV NEXT 5.1 CH CEN output RCA 5.1 CH SUR output RCA 5.1 CH FRONT output RCA RCA de salida de vídeo Component output RCA for Progressive Scan Scart output RCA Video output RCA S-Video output RCA...
WHITE Component video (for progressive scan) Connecting to a TV Set Composite video YELLOW VIDEO IN VIDEO S-VIDEO VIDEO IN AUDIO IN Notes: There are three ways of connecting the player's AV output to the TV set: 1. S-video cable and left/right audio cable [set the (Video Type) to (S-Video)].
Connecting to an AV Receiver with 5.1 Channel Analog Audio Input WHITE WHITE WHITE Notes: 1. Set the TV to the AV input connected to the DVD player. 2. Set the Amplifier to the AV input connected to the DVD player. YELLOW VIDEO IN Vídeo...
Connections Connecting to an AV Amplifier with Digital Audio Input Connections COAXIAL OPTICAL AMPLIFIER VIETA VR-6100 Notes: 1. Select the Coaxial digital audio output. 2. Set the player's audio out to Raw or PCM mode. 3. Set the Amplifier to the AV input connected to the DVD player.
2. Turn on the TV. 3. Turn down the volume on your amplifier, and then power it on. 4. Set the TV to the AV input connected to the DVD player. 5. Set the amplifier to the AV input connected to the DVD player.
SETUP In stop mode, press SETUP, and the TV screen will display the Setup Menu as follows: Setup Menu Language Setup Select [Language] in the Setup Menu, and press ENTER to display [Language] submenu: Select [OSD Menu] and press ENTER or submenu [OSD Menu]: Modes and Features Setup Press...
Page 16
Advanced Features Modes and Features Setup Language Setup Select [Subtitle], and press ENTER or [Subtitle] submenu: Select [Audio],and press ENTER or [Audio] submenu: Select [DVD Menu], and press ENTER or [DVD Menu] submenu: to display the Press to change your selection Note: Subtitle languages vary by disc A.
Video Setup Select [Video] in the Setup Menu, and press ENTER to display submenu [Video]: Select [TV shape], and press ENTER or [TV shape] submenu: Select [TV system] and press ENTER or menu [TV system]: Modes and Features Setup Press to select the menu item ENTER A.
Video output. [YUV] - Select if you connected the DVD player to your TV using the YUV output. [Y Pb Pr] - Select if you connected the DVD player to your TV using progressive scan. Note: The Composite video and S-video output is always available.
Page 19
The More Audio menu includes Pro Logic and Subwoofer settings. Pro Logic Setting The DVD player has a built-in Dolby Pro Logic decoder to provi- de virtual surround sound for PCM (stereo) source material from the 5.1 channel analog audio outputs.
Page 20
The Rating menu allows you to block playback of DVDs based on their ratings. Setting the Password & Rating Level The DVD player allows you to block playback of inappro- priate content with a passwordprotected Rating system (not all discs are rated).
Page 21
Advanced Features Modes and Features Setup Setting DivX-MPEG4 registration Not all DVDs are rated. DVDs that are rated higher than the level you select will not play without SELECTING the correct password. If you forget your Rating password, select 8888 to clear the memory.
Advanced Features Remote Control Operation STANDBY During playback, press STANDBY to stop the player and return to standby mode. While the player is in standby, press STANDBY or any key on the front panel to resume normal operation. OPEN/CLOSE To open the disc tray, press OPEN/CLOSE. To close the disc tray, press OPEN/CLOSE again.
Page 23
DISPLAY During playback, press DISPLAY to display the current time counter position. Press DISPLAY again to display additional information about the playing disc. Disc type Disc type Current title Audio type Subtitle Advanced Features Remote Control Operation Elapsed time of the current track/chapter Elapsed time of the current track Total tracks...
Page 24
Advanced Features Remote Control Operation TIME During playback, press TIME, and the [Track Search] menu will display as follows: Use the number keys to input the desired Time, Title or Chapter, then press ENTER to confirm. Notes: 1. Time searches for an exact time in the movie. 2.
Page 25
During DVD or CD playback, press and hold to scan forward. The player will review the disc at 2, 4, 8 and 16 times normal speed as follows: >> X2 >> X4 >> X8 >> X16 Press PLAY to resume normal playback. During DVD or CD playback, press and hold to scan in reverse.
Page 26
Advanced Features Remote Control Operation PLAY Press PLAY from stop mode to start playback. This function is not available if the elapsed time of current track is less than 10 seconds. Note: MP3 discs and some DVD discs do not have a 10 second review feature.
Page 27
Press MODE once to switch back to Interlace scan mode. Note: If you connect the DVD player to your TV using the component MODE Video Output, you can use the gressive scan for superior video quality. Remote Control Operation Input the track numbers in the order you would like them to play.
Page 28
Advanced Features Remote Control Operation SLOW Press SLOW repeatedly to slow motion playback at variable speeds. STEP Press STEP during playback to pause playback. Press STEP repeatedly to play frame. Press PLAY to resume normal playback. REPEAT Select to press REPEAT to select Repeat Title, Repeat chapter, Repeat off During DVD playback.
Page 29
VOL+ VOL- Volume <VOL+> button to increase Volume Press <VOL-> button to reduce volume till to no volu- me output. MUTE Press MUTE to mute the Audio output Press MUTE again to resume normal audio output ZOOM During DVD playback, press ZOOM to magnify the image as follows: >>...
Page 30
Advanced Features Remote Control Operation ANGLE During DVD playback Press ANGLE to view scenes from different camera angles. Press ANGLE repeatedly to change from one camera angle to another. Note: This function is disc specific. LANGUAGE During DVD playback Press LANGUAGE repeatedly to select from up to 8 audio languages/formats.
Supported formats Divx-MPEG4 is a video encode using the internatioual standard MPEG-4 and audio MP3 format. Disc format: ISO 9660, Joliet Music file format: MP3 MP3 bit rate (data rate): 32 - 192 kbps. Total number of music files and albums: around 350 per disc Sampling rate: (CBR) 32kHz/44.
Kodak Picture CD Playback The introduction of Kodak Picture CD A Kodak Picture CD has the size and shape of a regular CD. You can order a KODAK Picture CD simply by chec- king the box on the photo finishing envelope when you...
If you have any questions, please consult the troubleshoo- ting guide below. NO PICTURE OR SOUND Ensure the power button is on. Ensure the power outlet is operational. Ensure the power cord is not damaged. Ensure the power plug is connected firmly to the outlet. PICTURE BUT NO SOUND Ensure the audio RCA are securely connected.
Point the remote control at the remote sensor. (The pictures below are for reference only). Remarks: Do not expose the remote sensor of the DVD Player to a strong light source, such as direct sunlight. Notes: Point the remote control directly at the player's remote sensor.
Others Specifications Power requirements: 110-240 V, 50/60 Hz Power consumption: 25 W Video standard: NTSC/PAL/AUTO Unit weight: 3.8 kg Video out Video out: 1.0 V (p-p) / 75 ohms, sync, negative polarity, RCA pin Jack x 1 S-video output connector (separate Y/C signal output connector): Y output: 1.0 V (p-p) / 75 ohms, sync., negative polarity C output: 0.286 V (p-p) / 75 ohms.