Introduction Safety Precautions WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE. NEVER ATTEMPT TO OPEN THE CABINET, DANGEROUS HIGH VOLTAGES ARE PRESENTED IN THE UNIT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION: THE LIGHTNING FLASH WITH ARROWHEAD THE APPARATUS SHALL NOT BE EXPOSED TO WATER AND NO SYMBOL WITHIN AN EQUILATERAL TRIANGLE IS...
Introduction Important Safety Instructions 1. Read Instructions rating instructions. All the safety and operating instructions should be read befo- re the product is operated. 12. Grounding or Polarization This product may be equipped with a polarized alternating 2. Retain Instructions current line plug (a plug having one blade wider than the The safety and operating instructions should be retained for other).
Page 6
Introduction Important Safety Instructions other hazards. Refer all servicing to qualified service person- nel. 20. Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: A) When the power-supply cord or plug is damaged, B) If liquid has been spilled, or objects have fallen into the product, C) If the product has been exposed to rain or water,...
Introduction Caution Please use the original box and packing materials for safe transportation of this product. It is normal for the cover and rear panel to become warm after the player has been operating for an extended period of time. Do not move this product during playback.
Introduction Features Full compatibility with DVD, CD, MP3, Kodak Picture Disc formats supported by this player: CD, CD-R and CD-RW (finalized) Screensaver Dolby digital Dynamic spectrum display Coaxial digital audio output S-video, composite video and component (Y, Pb, Pr) KODAK Picture CD video outputs MP3 files on CD-R/CD-RW DVD video...
Introduction Front Panel and Rear Panel Illustration Front Panel POWER DISC TRAY OPEN/CLOSE SCREEN SENSOR PLAY PAUSE STOP PREVIOUS NEXT Rear Panel 2CH Audio output RCA 2CH Audio output RCA Video output RCA Component output RCA Scart output RCA S-Video output RCA Digital signal coaxial output RCA Digital signal optical output RCA...
SCART IN VIDEO S-VIDEO SCART VIDEO IN AUDIO IN VIETA TFT-270 Notes: There are three ways of connecting the player's AV output to the TV set: 1. S-video cable and left/right audio cable [set the (Video Type) to (S-Video)]. 2. Composite video cable and left/right audio cable.
Connecting to an AV Amplifier with 2 Channel Analog Audio Input YELLOW VIDEO IN Vídeo WHITE OTHER UNITS AUDIO IN AMPLIFIER VIETA VR-6100 Notes: 1. Set the TV to the AV input connected to the DVD player. 2. Set the Amplifier to the AV input connected to the DVD player.
Connecting to an AV Amplifier with Digital Audio Input Connections COAXIAL OPTICAL AMPLIFIER VIETA VR-6100 Notes: 1. Select the Coaxial digital audio output. 2. Set the player's audio out to Raw or PCM mode. 3. Set the Amplifier to the AV input connected to the DVD...
Basic Playback Basic Operation Preparation before playing: 1. Connect the DVD player to your TV and amplifier. 2. Turn on the TV. 3. Turn down the volume on your amplifier, and then power it on. 4. Set the TV to the AV input connected to the DVD player. 5.
Advanced Features Modes and Features Setup SETUP In stop mode, press SETUP, and the TV screen will display the Setup Menu as follows: Press to change items A. Press ENTER to display each submenu B. Press SETUP to exit the Setup Menu Setup Menu Language Setup Select [Language] in the Setup Menu, and press ENTER to...
Page 16
Advanced Features Modes and Features Setup Language Setup Select [Subtitle], and press ENTER or to display the [Subtitle] submenu: Press to change your selection Note: Subtitle languages vary by disc A. Press ENTER to confirm B. Press SETUP to exit the Setup Menu Select [Audio],and press ENTER or to display the [Audio] submenu:...
Advanced Features Modes and Features Setup Video Setup Select [Video] in the Setup Menu, and press ENTER to display submenu [Video]: Press to select the menu item ENTER A. Press to confirm B. Press to return to the Setup Menu Select [TV shape], and press ENTER or to display the [TV shape] submenu:...
Page 18
Advanced Features Modes and Features Setup Select [Video Output], and press ENTER or to display the [Video Out] submenu: A. Press ENTER to confirm B. Press SETUP to exit the Setup Menu [S-Video] - Select if you connected the DVD player to your TV using the composite Video output.
Page 19
Advanced Features Modes and Features Setup Rating Setup The Rating menu allows you to block playback of DVDs based on their ratings. Setting the Password & Rating Level The DVD player allows you to block playback of inappro- priate content with a passwordprotected Rating system (not all discs are rated).
Advanced Features Remote Control Operation STANDBY During playback, press STANDBY to stop the player and return to standby mode. While the player is in standby, press STANDBY or any key on the front panel to resume normal operation. OPEN/CLOSE To open the disc tray, press OPEN/CLOSE. To close the disc tray, press OPEN/CLOSE again.
Page 21
Advanced Features Remote Control Operation DISPLAY During playback, press DISPLAY to display the current time counter position. Elapsed time of the current track/chapter Press DISPLAY again to display additional information about the playing disc. Disc type Elapsed time of the current track Total tracks Current track Disc type...
Page 22
Advanced Features Remote Control Operation TIME During playback, press TIME, and the [Track Search] menu will display as follows: Notes: 1. Time searches for an exact time in the movie. 2. In Title/Chapter mode, you cannot SELECT a value outside the range of the total number of titles or chapters 3.
Page 23
Advanced Features Remote Control Operatiion During DVD or CD playback, press and hold to scan forward. The player will review the disc at 2, 4, 8 and 16 times normal speed as follows: >> X2 >> X4 >> X8 >> X16 Press PLAY to resume normal playback.
Page 24
Advanced Features Remote Control Operation PLAY Press PLAY from stop mode to start playback. This function is not available if the elapsed time of current track is less than 10 seconds. Note: MP3 discs and some DVD discs do not have a 10 second review feature.
Page 25
Advanced Features Remote Control Operation PROG While [PROGRAM] is on, press ENTER to display the [Pro- gram] submenu: Input the track numbers in the order you would like them to play. When finished, select [Play Program] and then press ENTER to play the tracks in the new programmed order.
Page 26
Advanced Features Remote Control Operation SLOW Press SLOW repeatedly to slow motion playback at variable speeds. STEP Press STEP during playback to pause playback. Press STEP repeatedly to play frame. Press PLAY to resume normal playback. REPEAT Select to press REPEAT to select Repeat Title, Repeat chapter, Repeat off During DVD playback.
Page 27
Advanced Features Remote Control Operation VOL+ VOL- Volume <VOL+> button to increase Volume Press <VOL-> button to reduce volume till to no volu- me output. MUTE Press MUTE to mute the Audio output Press MUTE again to resume normal audio output ZOOM During DVD playback, press ZOOM to magnify the image as follows:...
Page 28
Advanced Features Remote Control Operation ANGLE During DVD playback Press ANGLE to view scenes from different camera angles. Press ANGLE repeatedly to change from one camera angle to another. Note: This function is disc specific. LANGUAGE During DVD playback Press LANGUAGE repeatedly to select from up to 8 audio languages/formats.
Advanced Features MP3 Playback Supported formats Note: The player will not identify or play MP3 discs under the Disc format: ISO 9660, Joliet following conditions: recording format is not supported, Music file format: MP3 badly scratched or deformed disc, MP3 recorded in CD-R MP3 bit rate (data rate): 32 - 192 kbps.
Avanced Features Kodak Picture CD Playback General function The introduction of Kodak Picture CD You can set slideshow transition modes for any pictures. A Kodak Picture CD has the size and shape of a regular CD. You can order a KODAK Picture CD simply by chec- Press PAUSE to stop playing.
Others Troubleshooting If you have any questions, please consult the troubleshoo- ting guide below. NO PICTURE OR SOUND REMOTE NOT WORKING Ensure the power button is on. Ensure the remote batteries are working. Ensure the power outlet is operational. Point the remote control directly at the player's IR sensor.
Others Remote Control Preparation USING THE REMOTE CONTROL INSERT BATTERIES Open the cover. Point the remote control at the remote sensor. (The pictures below are for reference only). Insert batteries. 30º 30º Make sure to match the "+" and "-" of the bat- teries with the marks inside the battery com- partment.
Others Specifications Power requirements: 230 V, 50 Hz Power consumption: 25 W Video standard: NTSC/PAL/AUTO Unit weight: 3.8 kg Video out Video out: 1.0 V (p-p) / 75 ohms, sync, negative polarity, RCA pin Jack x 1 S-video output connector (separate Y/C signal output connector): Y output: 1.0 V (p-p) / 75 ohms, sync., negative polarity C output: 0.286 V (p-p) / 75 ohms.