Using The Accessories; Working With Detergents - Kärcher G2600XH Operator's Manual

Quick connect nozzles
The color-coded quick connect nozzles provide a
wide array of spray widths from 0° to 65° and are
easily accessible when placed in the convenient
nozzle holder.
0° spray angle = Red nozzle
For particularly stubborn accumulation of grime.
Not recommended for soft materials like sidings,
decks, painted surfaces, cars.
15° spray angle = Yellow nozzle
For dirt accumulation over a surface.
25° spray angle = Green nozzle
For dirt accumulation over a large surface.
Detergents can only be applied with the black
detergent nozzle.
STEP 1:
Install the black detergent nozzle for detergent
application (will work at low pressure only).
STEP 2:
Fill the detergent tank with Kärcher detergent.
Close the detergent tank with the detergent
mattering cap .
STEP 3:
Adjust the detergent metering valve to the
desired dosage.

USING THE ACCESSORIES

40° spray angle = White nozzle
For moderate dirt accumulation over a large
surface.
65° spray angle = Black nozzle
For operating with detergents or cleaning with
low pressure.
■
■

WORKING WITH DETERGENTS

For best results see Cleaning Tips for spe-
cific information on how to clean different
surfaces.
WARNING
High pressure in nozzle area. Risk of injury
caused by improperly locked nozzle.
Make sure you hear the "click" when inserting
the nozzle tip into the quick connection.
Pull the nozzle to make sure it is seated
properly before operating your unit. (See
ASSEMBLY NSTRUCTIONS: Step 6)
WARNING
To avoid serious injury never point spray noz-
zle at yourself, other persons or animals.
STEP 4:
With the engine running, pull trigger to operate
unit. Liquid detergent is drawn into the unit
and mixed with water.
Apply detergent to work area.
Do not allow detergent to dry on surface.
STEP 5:
Always draw fresh water through the deter-
gent suction tube when the cleaning job is
done, to rinse/fl ush any remaining detergents
from the injection system.
English 9