Table of Contents
Advertisement
CONGRATULATIONS!
When you purchased your new fireplace, you joined the ranks of thousands of individuals
whose answer to their home heating needs reflects their concern for aesthetics, efficiency
and our environment. We extend our continued support to help you achieve the maximum
benefit and enjoyment available from your new fireplace.
Thank you for selecting a IHP fireplace as the answer to your home supplemental heat-
ing needs.
TABLE OF CONTENTS
Safety Rules ......................................Page 2
Introduction ......................................Page 3
Parts Required .................................Page 3
Optional Equipment ...........................Page 3
Operating The Fireplace .....................Page 3
Fuel ...................................................Page 3
Combustion Control .........................Page 4
Refueling For Best Performance .......Page 5
Smoking - Causes And
Troubleshooting ..............................Page 5
Important Cautions ...........................Page 5
Maintaining Your Fireplace ...............Page 5
Creosote ............................................Page 5
Chimney Maintenance .......................Page 6
Dealing With A Chimney Fire .............Page 6
Door Frame Finish Care .....................Page 6
Disposing of Ashes ...........................Page 6
Refractory Replacement ....................Page 6
Door Installation ...............................Page 6
Door Adjustment ...............................Page 6
Glass Care - Replacement .................Page 7
Glass Care - Cleaning ........................Page 7
Gasket Replacement ........................Page 7
Fireplace Installation ........................Page 7
Locating The Fireplace ......................Page 7
Facade Installation ............................Page 9
Framing, Facing And Mantel ..............Page 9
Hearth Extension Requirements .......Page 9
Cold Climate Installations ..................Page 9
Nailing Flanges ..................................Page 11
Mantel and Facing .............................Page 11
Fireplace Blower ................................Page 12
Hot Air Ducting Installation ..............Page 12
Gravity Kit .........................................Page 10
Outside Air Kit ..................................Page 13
Chimney System ...............................Page 14
Chimney Installation Notes ...............Page 14
Chimney Installation Instructions ......Page 15
Offset Chimney Installation ...............Page 16
Angled Wall Radiation Shield ............Page 19
Chimney Support Installation ............Page 19
Masonry Application Instructions .....Page 20
Installation Accessories ....................Page 21
Replacement Parts ...........................Page 22
Specifications ....................................Page 22
Clearance to Combustibles ...............Page 22
Chimney Components Lists ..............Page 23
Warranty ...........................................Page 25
Product Reference Information .........Page 26
THE FIREPLACE
INTRODUCTION
The WCT6840WS wood-burning fireplace is
an energy efficient, heat circulating, closed
combustion fireplace. You will receive a lifetime
of comfort and enjoyment from your fireplace
provided it is installed, maintained and oper-
ated properly.
•
Please read these instructions and retain
this manual for future reference.
•
Before beginning the fireplace installation,
consult the local authorities to obtain your
building permit and check your local building
codes. Install the fireplace only as described
in these instructions and using only IHP
components.
• This fireplace has been tested for CAN/ULC
S610-M87 and ANSI/UL 127 under report
number 304-7213. It has also been tested
for EPA 40 C.F.R Part 60, section 60.532(b).
Certificate number 609.
•
The WCT6840WS fireplace is not intended
for use with a gas log set. Do not use a
fireplace insert or any other product with
this fireplace unless it is specified by IHP
for use with this appliance. Failure to follow
these instructions will void the certification
and the warranty of the fireplace and may
result in an unsafe installation.
• These appliances are designed to provide
supplemental heat to the immediate area only.
Therefore, it is advisable to have an alternate
heat source when installed in a dwelling.
• These appliances are not approved for
Manufactured Home installations.
PARTS REqUIRED
Fireplace model: WCT6840WS
•
7" diameter chimney
- Model Secure Temp
*
S-2100+, Nova Temp
HT6000+, Secure
®
Temp GX (U.S. only) or ACBI manufactured
by Security Chimneys International™ only,
including:
- Chimney lengths
- Elbows (where necessary)
- Associated components as per these
installation instructions
•
..Decorative Doors - Required
....(Order Separately - See Page 21)
•
Front Facade kit - Required
...(Order Separately - See Page 21)
•
UZY7 Blower (included in the fireplace).
•
VRUW Blower Speed Control (included)
•
Outside air kit (Included w/Fireplace)
OPTIONAL EqUIPMENT
- AC Chimney Adaptor
(required if using AC Chimney
- AC Chimney Outside Air Kit
- Gravity Venting System
- Rigid Firescreen
Additional Equipment (optional)
- Forced Air Kit
u
- Gravity Venting System
- Tubinox™
chimney (or Projet
*
diameter with adaptor for installation in a
masonry chimney.
u
Not tested under EPA certification. If in-
stalled, this appliance no longer qualifies
for EPA certification.
OPERATING THE WCT6840WS
FIREPLACE
Fuel - USE SOLID NATURAL WOOD FUEL
ONLY. The WCT6840WS fireplace is designed
to work best when fueled with dry seasoned
natural wood only. Hardwoods are preferred to
softwoods since the energy content of wood is
relative to its density. Hardwoods will result in a
longer burning fire and less frequent refueling.
A moisture content of 15% to 20% (seasoned)
is recommended. Wood that has been cut and
split and let to dry under a cover for a period
of one year will usually meet that criteria. The
required drying time will vary depending on the
climate. Wood that is packed tight together will
take longer to dry. Seasoned wood is darker in
color than wet wood and will have visible cracks
in the grain on the ends. Excessively wet wood
will be difficult to burn and will result in lower
efficiency, increased creosoting and deposits
on the glass and in the chimney. Excessively
dry wood will burn well but will also have higher
emissions and shorter burning time.
Do not burn scrap or garbage, treated wood or
wood such as driftwood from the ocean which
has been exposed to salt or other chemicals.
Salt or chemicals can corrode the firebox and
chimney. Do not burn large amounts of paper,
®
cardboard, Christmas tree branches or building
construction materials. Intense firing with these
materials may overheat the fireplace, causing
damage to the unit, a fire or even possibly ignit-
ing a chimney fire if the chimney is creosoted.
Burning unapproved fuel, resulting in excessive
pollutants being emitted, may be prohibited and
subject to a fine or other penalty by the authority
having jurisdiction in your area.
Processed firelogs can be used. Use only fire-
logs that have been evaluated for the application
of fireplace and refer to firelog warnings and
caution markings on packaging prior to use.
*
Available from Security Chimneys™
*
)
*
SS
), 7"
®
*
3
- Quick Links:
- Replacement Parts
Hide quick links:
Advertisement
Table of Contents
