Kodak Z740 User Manual page 34

Doing more with your camera
Setting
White Balance
Choose your lighting
condition.
This setting remains until you
turn the Mode dial or turn off
the camera.
Exposure Metering
Evaluate light levels at
specific areas of a scene.
This setting remains until you
turn the Mode dial or turn off
the camera.
Focus Zone
Select a large or concentrated
area of focus.
This setting remains until you
turn the Mode dial or turn off
the camera.
28
Icon Options
Auto (default)—automatically corrects
white balance. Ideal for general picture
taking.
Daylight—for pictures in natural lighting.
Tungsten—corrects the orange cast of
household light bulbs. Ideal for indoor
pictures under tungsten or halogen lighting
without flash.
Fluorescent—corrects the green cast of
fluorescent lighting. Ideal for indoor pictures
under fluorescent lighting without flash.
Open Shade—for pictures in the shade in
natural lighting.
Available only in PASM mode.
Multi-pattern (default)—evaluates
lighting conditions throughout the image to
give an optimum picture exposure. Ideal for
general picture taking.
Center-weight—evaluates the lighting
conditions of the subject centered in the
viewfinder. Ideal for backlit subjects.
Center-spot—similar to Center-weight,
except the metering is concentrated on a
smaller area of the subject centered in the
viewfinder. Ideal when you need an exact
exposure of a specific area in the picture.
Available only in PASM mode.
Multi-zone (default)—evaluates 3 zones
to give an even picture focus. Ideal for
general picture taking.
Center-zone—evaluates the small area
centered in the viewfinder. Ideal when
precise focus of a specific area in the picture
is needed.
NOTE: For the best pictures, the camera is set to
Multi-zone when in Landscape mode.
Available only in PASM mode.
www.kodak.com/go/support