Identification Of Parts - Heat Controller BHD-H Series Owner's Manual

Heat Controller

IDENTIFICATION OF PARTS

Identification of Parts
Front
1
Control panel
2 Air intake grille
3 Air outlet grille
Air filter (behind the grille)
4
Water bucket
5
6 Handle (both sides)
Rear
Continuous drain hose outlet and plug
1
2 Casters
3
Power cord and plug
4
Cable Tie (to store power cord
when unit is not in use.)
5
Pump drain hose outlet
NOTE: All the pictures in the manual are for explanation purposes only. The actual shape of the
unit you purchased may be slightly different, but the operations and functions are the same.
ACCESSORIES
ATTENTION: Check
inside the bucket and
the packaging for
these accessories.
Hose Segment (1pc)
required for pump models only
to use during pump operation
BHD-H/ BHDP-H Portable Dehumidifier
Continuous Drain
Hose Segment (1pc)*
required to bypass
bucket for gravity drain
Pump Drain
Adapter A (1pc)*
*NOTE: Some models will have the continuous
drain hose and adapter already assembled together.
Other models will require you to attach the drain
hose to the adapter.
6
Owner's Manual
Fig. 3
Fig. 4
Screw (2pc)
required for
continuous
drainage